FYP 2 - Week 14(2) *Industry day*

FINAL YEAR PROJECT PRESENTATION

The Presentation Day has been a successfully finish. I have presented my project to both of the assigned accessors and they are satisfied with my project.

• Venue: Gemilang Hall
• 13 May 2015 
• Wednesday
• Time: 8.00am – 12.00pm (FYP 2 Degree Presentation)
• 8.00am (booth and poster setup)
•  All students of FYP 2 must register first before assessors are coming 9.00am (assess begins)

Now I have to write the FINAL REPORT for the Final Year Project which I must submit before Friday of week 15.

FYP 2 - Week 14

PREPARATION FOR INDUSTRY DAY AND PRINT POSTER

• Test again the whole project system to make sure everything runs smoothly.
• Study all the components function that related with the project.
• Provide some examples of questions that will be asked by the assessors
• Size of poster required is A1 measurement
• The cost of printing is RM37 include GSt

Below is the demo for my project

FYP 2 - Week 13

CREATE A POSTER 

1. Create a poster by using a power point that provided by UNIKL BMI FYP blog, i just edit it from there.
2. Size poster requirement for presentation is A1
3. Below is picture I had done for my poster
4. Also in this week, I also do draft report for chapter 4 and 5, I submit it to my supervisor for approval.

FYP 2 - Week 12

MAKE LIST FOR POSTER REQUIREMENT IN PRESENTATION

Before making a poster, I have seen some examples of posters available at FYP blog, I just fill the poster before print it. among requirement that must be follow is:

• Project Title
• Student’s name
• ID Student
• Programme
• Supervisor’s name
• objective
• project description
• methodology
• flowchart
• result
• conclusion
• reference

FYP 2 - Week 11

TESTING PROJECT

This is a result of the overall project after all testing, development and design finally has been successfully build and completed. This system can be used for house, office that used for door lock security using fingerprint. From picture below it shows when I has been successfully register or enroll the thumbprint and ready to access the house to access the system.

Fingerprint scanning to access the house

After the scanning fingerprint, the fingerprint sensor will identify and will process send to Arduino and will trigger solenoid to unlock the door, if not, the solenoid will lock until it gets a right thumbprint.

From picture below it shown the solenoid before scanning fingerprint the solenoid will lock and after the fingerprint the solenoid will unlock. It means, when a door via a solenoid, it is using basic electromagnetic forces to control the lock. The solenoid fits in the locking mechanism and, when locked, will expand so the device cannot be unlocked by sheer force. An electromagnetic force, such as a keycard, is needed to tell the solenoid to move, allowing the device to unlock and open.

Solenoid will lock before fingerprint scanning happen

Solenoid will unlock after successfully scanning

While the locking solenoid will keep the device locked, it is not technically on when in locking mode, because no power is being used. The solenoid only needs power when unlocking and, because most devices are consistently locked, very little energy is ever required by the solenoid. For this reason, most solenoids run on battery power, and the battery rarely needs to be changed, but in this project, the supply adapter is used for that battery.

After the fingerprint a solenoid process, the data fingerprint that user scan fingerprint from figure 4.10 will send to android application which is web server. Web servers are computers that deliver (serves up) Web pages. Every Web server has an IP address and possibly a domain name. For example, if users enter the URL http://192.168.0.2 in browser, this sends a request to the Web server whose domain name is 192.168.0.2. The server then fetches the page named 192.168.0.2 and sends it to browser.

After fingerprint scanning, the data will sent to android application to show I access the system

It shown the data user when I scanning fingerprint to enter the system. With this, I can only access that IP address from home. This means I must be connected to the same router that user has Ethernet shield is connected to. That picture is from I accessing webserver with my Android Smartphone.

FYP 2 - Week 10

MAKE MODIFICATION THE HOUSE PROTOTYPE TO MAKE MORE ATTRACTIVE

The modifications are:

• windows to make it like a real house
• Create a door
• Modified on the roof

Front House

the back house

FYP 2 - Week 9

BUILDING A PROTOTYPE OF FYP PROJECT

Steps of building a prototype 

• Find some design example of house on the internet. 
• The concept of the house will be in brown and white theme to make it more attractive.
• Can buy the materials at bookstore
• Next, design a wall for the front and the back of the house
• Make a base for put a project
• Lastly, make a roof and the roof is removable.

Cardboard brown and white

Cutting the white board for house

After cutting it

Glue it

Make a base for the house

The house is complete